全部
▼
2288 主要特点Main features
Heat insulating materials adopt Alumina fiber inorganic ones, which is formed with vacuum absorption, environmental protecting and energy saving.
Furnace body is double air cooling structure to control furnace surface Temp. no more than 60℃ when furnace is heated into max. Temp.
炉体采用双层风冷结构，炉子烧到最高温度时，壳体表面温度低于60℃
Made of various heat insulating materials to make furnace smaller and energy consumption less(electric consumption is only 25% of the same type furnace consumption)
采用多种保温材料组合制成，使炉子体积小，能量消耗少(耗电量是同类产品耗电量的四分之一)
技术参数Technical Parameters
Power
输入电源
Power rated: 13KW (220V)
额定功率：13KW (220V)
Voltage
电压
Voltage rated: AC 220V 50/60HZ
额定电压：AC 220V 50/60HZ
Working Temperature
工作温度
Max. Temperature: 1700℃( 1 hr)
最高温度：1700℃ (1小时)
Continuous working temperature: ≤1600℃
持续工作温度：≤1600℃
Recommended Heating Rate:
1400℃ below ≤10℃/min, 1400-1600℃ ≤ 5℃/min, 1600℃ above ≤2℃/min
1400℃以下 ≤10℃/分, 1400-1600℃ ≤ 5℃/分, 1600℃以上 ≤2℃/分
Temperature Controller
控温方式
PID automatic control and auto-tune function.
模糊PID控制和自整定调节
30 programmable segments for precise thermal processing.
智能化30段可编程控制
Built-in protection for the over-heated and broken thermocouple.
超温和断偶报警功能
Thermocouple
热电偶
B type
B型
Heating Elements
加热元件
Silicon Molybdenum Rod (4pcs U shape)
硅钼棒（4只，U形）
Temperature Accuracy
控温精度
+/- 1℃
Dimensions
尺寸
Chamber size(L*D*H): 300*400*300mm (36L)
腔体尺寸(长*深*高)：300*400*300mm (36L)
Furnace size(L*W*H): 680*750*1040mm
炉子尺寸(长*宽*高)：680*750*1040mm
Net Weight
净重
300kg
Packing dimensions(L*W*H)
包装尺寸(长*宽*高)
900*760*1400 mm（wooden case）
900*760*1400 mm（木箱）
Gross weight
毛重
420kg
Warranty
质保
One year limited warranty with lifetime support (Such consumable parts as thermal insulation material, and O-rings are NOT supported by the warranty)
一年质保终身支持（消耗品如保温材料，O型圈不在质保范围内）
Attention
注意事项
Toxic or explosive gasses are not recommended for use with this furnace without necessary safety controls and supervision. Please put furnace into fume hood for better safety
没有安全控制和监督的情况下，不建议使用有毒或爆炸性气体。为了安全，请把炉子放在通风处。
Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.
在使用过程中炉膛表面可能出现细小裂纹。这是正常情况，裂纹可以用氧化铝涂层修复。
You shall place the sample in to a crucible. Never place sample on the chamber bottom directly.
应该把样品放进坩埚里。不要把样品直接放在腔底。
Compliance
认证
CE Certified
CE认证
All electric components ( >24V) are UL / MET / CSA certified
所有电气部件( >24V)都有UL / MET / CSA 认证
The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost.
可付费进行TUV(UL61010)或CSA认证
咨询底价
